I followed everyone's build procedure, but forgot to do the setup sheet procedure and look what came out of the box:
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XRAY presents the all-new XB8 ........ 808 - 2010Specs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7071 |
Page 25 of 29 |
| Author: | Craige Lewis [ Fri Jul 11, 2008 05:07:47 ] |
| Post subject: | |
| Author: | Team Helotes [ Fri Jul 11, 2008 05:15:06 ] |
| Post subject: | |
| Author: | auto2 [ Fri Jul 11, 2008 13:27:03 ] |
| Post subject: | |
| Author: | kilana [ Fri Jul 11, 2008 14:19:24 ] |
| Post subject: | PLEASE HELP! |
I followed everyone's build procedure, but forgot to do the setup sheet procedure and look what came out of the box:
|
|
| Author: | Team Helotes [ Fri Jul 11, 2008 18:02:44 ] |
| Post subject: | Re: PLEASE HELP! |
| Author: | Jason Branham [ Fri Jul 11, 2008 20:45:18 ] |
| Post subject: | |
Kilana, Where abouts are you in Sugar Land? I work over here off of West Airport. |
|
| Author: | kilana [ Fri Jul 11, 2008 21:34:57 ] |
| Post subject: | |
| Author: | Jason Branham [ Fri Jul 11, 2008 22:25:05 ] |
| Post subject: | |
| Author: | kilana [ Sat Jul 12, 2008 02:39:12 ] |
| Post subject: | |
| Author: | jono_EC [ Sat Jul 12, 2008 06:02:09 ] |
| Post subject: | |
| Author: | mario [ Sat Jul 12, 2008 06:35:03 ] |
| Post subject: | |
| Author: | jono_EC [ Sat Jul 12, 2008 12:27:24 ] |
| Post subject: | |
| Author: | UndergroundRC [ Mon Jul 28, 2008 04:37:26 ] |
| Post subject: | |
808 podium in US... this weekend! Odonnell Championship 08 Held at Revelation Raceway in California Well we had our big Odonnell two day race out here in CA... and man it was brutal! Hot, humid and packed with fast US racers, this race was quite a battle. I hoped to be one of the only "no-name" racers to even make the A-main, but I ended up bringing home a trophy and exceeding my expectations after only having this buggy for about 5-6 races!!! 
Thanks to my pit guys....! I qualified in 6th and in the main, I held 2nd place all the way until two minutes left in the 40 minute A-main. So with two to go my glow plug goes south, and my tires became extremely difficult to drive on (see pic..). But hey, I'll gladly take 3rd and.... recommend this new XB808 buggy to anyone who reads this! I used to drive a Losi, but this buggy is just plain better in every way for me. My buggy felt so dialed! Wow, I actually had tons of fun this weekend,.. and I didn't have to work on the buggy at all! I think I did about 35 minutes worth of work on the buggy this whole weekend. Motor/tire issues may have stolen my second place finish, but man this buggy felt dialed. Heres my ride.. and some hardware...
 
P.S. I want my missing fuel back.... suckers! |
|
| Author: | rezenclowd3 [ Mon Jul 28, 2008 05:16:48 ] |
| Post subject: | |
Wow, good job dude! There is always good competition at Rev, and Dana runs a GREAT show! I missing driving onroad there though... 
|
|
| Author: | UndergroundRC [ Mon Jul 28, 2008 05:22:43 ] |
| Post subject: | |
| Author: | Brian M [ Mon Jul 28, 2008 07:04:04 ] |
| Post subject: | |
| Author: | daz.fx [ Mon Jul 28, 2008 11:36:01 ] |
| Post subject: | |
I think this is exactly what xray was aiming for, club racers doing really well and its been working. Well done there matey you must be buzzin. |
|
| Author: | MALLET [ Mon Jul 28, 2008 14:20:33 ] |
| Post subject: | |
| Author: | Gavo [ Sun Aug 03, 2008 05:50:08 ] |
| Post subject: | Bearings spinning in Bulkhead |
Hi all, I to have had bearing probs with Bob, i could be wrong but seems to me that it is due to a poor bearing fit in the bulk head, so hears a little mod ive come up with, you can use 2 or 3 1.5mm grub screws,drill into the bulkhead from the out side where the bearing seats 2 screws 180 deg apart, 3 screws 90 deg apart, gently screw the grub screws in to contact the outside of the bearing, not to tight or the bearing will bind, this will hold the bearing in place with no detrementle efects to the bulkhead. This has stopped my bearings from spinning in there housings, not the be all end all but will do untill Xray come up with a solution, if there going to. In my opinion the bearings are the cars only downfall, but other than this the car is awsome. I have a pic but not sure how to attach to this post, but can email it to any one that can post it. |
|
| Author: | King Of Lean [ Mon Aug 04, 2008 18:51:36 ] |
| Post subject: | |
| Page 25 of 29 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|