| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XRAY presents the all-new XB8 ........ 808 - 2010Specs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7071 |
Page 23 of 29 |
| Author: | ahsikes [ Mon Jun 09, 2008 11:45:27 ] |
| Post subject: | |
any ETA on the graphite top plate, aluminum arm mounts ect? |
|
| Author: | Steve Walters [ Thu Jun 12, 2008 05:44:27 ] |
| Post subject: | |
| Author: | MALLET [ Thu Jun 12, 2008 10:58:29 ] |
| Post subject: | |
| Author: | Rocco Margiotta [ Thu Jun 12, 2008 16:31:07 ] |
| Post subject: | |
| Author: | Toppie [ Fri Jun 20, 2008 05:41:56 ] |
| Post subject: | |
| Author: | brano [ Fri Jun 20, 2008 09:03:57 ] |
| Post subject: | |
| Author: | Keith [ Fri Jun 20, 2008 17:08:47 ] |
| Post subject: | |
| Author: | auto2 [ Sat Jun 21, 2008 04:50:20 ] |
| Post subject: | |
| Author: | Grassie [ Mon Jun 23, 2008 16:14:41 ] |
| Post subject: | |
Hi guys. I'm a new owner as well.  Bought it on Teusday and its ready to race. Toppie saw me comming and talked me into one.  On the issue of stripped screws, I also have a couple. Was able to grab the heads with a pair of pliers and got them out. Then referred to the destructions!  Like most guys I got stuck in and only read the instructions when it was to late.
Very nice car though, if it goes as well as Toppies, I'll be over the moon
|
|
| Author: | Grassie [ Mon Jun 23, 2008 16:27:31 ] |
| Post subject: | Hop-ups |
To bling or not to bling, that is the question. I have added hop-ups in the past just to make my ride heavier and slower. My first reaction was to replace the hubs with alu parts. Then I read Mr Hudy's point of view and it makes sence. They went the "plastic" way to save weight, and its not just plastic, it's composite! Auto2, words spoken like a true profesional!
|
|
| Author: | Keith [ Mon Jun 23, 2008 16:33:42 ] |
| Post subject: | |
I managed to snap a front inside camber link Saturday. http://www.amainhobbies.com/product_inf ... s_id/24477 I got shoved off the track by another car and rode the tube at a wierd angle, until it caught a tube spike. Brought it to a dead stop at about 25-30 mph, then the suspension was hanging out. You might pick up a package of these, for the possibilty. Someone else on here also snapped one right away. The material is a little thin in that area. |
|
| Author: | Toppie [ Tue Jun 24, 2008 05:49:13 ] |
| Post subject: | |
| Author: | Grassie [ Wed Jun 25, 2008 07:53:36 ] |
| Post subject: | |
Hi Toppie, sorry I wont make it to Middelburg this weekend. I broke a diff casing on the X1. The supplier doesnt have any in stock and none of the guys I asked have any. I got the painted body for the 808 last night, Mark has done a super job as usual. Will see you at Trap or Avion. |
|
| Author: | UndergroundRC [ Wed Jun 25, 2008 21:29:18 ] |
| Post subject: | |
| Author: | djballen [ Thu Jun 26, 2008 05:07:56 ] |
| Post subject: | |
| Author: | djballen [ Thu Jun 26, 2008 05:10:45 ] |
| Post subject: | |
| Author: | UndergroundRC [ Thu Jun 26, 2008 05:12:50 ] |
| Post subject: | |
| Author: | djballen [ Thu Jun 26, 2008 05:21:46 ] |
| Post subject: | |
| Author: | Robert M [ Thu Jun 26, 2008 07:50:04 ] |
| Post subject: | |
| Author: | UndergroundRC [ Thu Jun 26, 2008 07:56:30 ] |
| Post subject: | |
| Page 23 of 29 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|