XRAY - Model racing cars

I've now replaced my shafts with new ones and without damage I stuck 40wt in the front & 45wt in the rear and using the top middle on both towers and inner hole on arms, the fronts feel a little soft and require most of the preload to set the driveshafts level, the rear feels lovely, I will testh this weekend...

One thing to note...don't do the nuts up too tight, make sure there is enough movement.

Good tip about the foams, I'll see how I go before I try that one or wait until the next shock oil change.

It could well be the springs Tricksy, I am running the stock silver springs.

The shocks are compressing but then not levelling out, just stay compressed, they return little but not much.

So 50 F and 60wt R and grey springs...I'll try that but what preload are you all using?

Cheers!