| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XRAY XT8 ----- Truggy General Forum https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=3598 |
Page 19 of 52 |
| Author: | rcracer33 [ Tue Mar 20, 2007 05:50:59 ] |
| Post subject: | |
| Author: | brano [ Tue Mar 20, 2007 08:23:07 ] |
| Post subject: | |
| Author: | Marsod [ Tue Mar 20, 2007 14:44:50 ] |
| Post subject: | XT8 - Colours? |
Does anybody know what colors they vill produce their Wings and rims at? I Need orange rims to match my colours on my XB8 TQ! I´m thinking of painting it the same way but that depends on the colours of the rims. This is my XB8! |
|
| Author: | 180 booker [ Tue Mar 20, 2007 16:53:40 ] |
| Post subject: | |
| Author: | Keith [ Tue Mar 20, 2007 18:44:53 ] |
| Post subject: | |
| Author: | akaver [ Wed Mar 21, 2007 10:04:02 ] |
| Post subject: | |
I noticed this post on "Picture Gallery": --------- The Jammin X1-CRT body will be drop-on for the XT8. A little bird told me. --------- Can somebody from XRAY confirm this? |
|
| Author: | 180 booker [ Wed Mar 21, 2007 15:10:21 ] |
| Post subject: | |
| Author: | Rocco Margiotta [ Wed Mar 21, 2007 16:07:24 ] |
| Post subject: | |
This is correct, the Pro-Line Jammin body fits on the XT8, so if you want to get one painted up whilst waiting on the truck, buy that one. Seriously. |
|
| Author: | Andy Taylor [ Thu Mar 22, 2007 21:21:44 ] |
| Post subject: | |
| Author: | Rocco Margiotta [ Thu Mar 22, 2007 22:32:54 ] |
| Post subject: | |
| Author: | carlo71 [ Thu Mar 22, 2007 22:54:39 ] |
| Post subject: | |
HEY rocco will the str/hellfire standard offset rims work?? |
|
| Author: | Rocco Margiotta [ Thu Mar 22, 2007 23:03:32 ] |
| Post subject: | |
They will make the truck just a tad narrow .1 inches on every corner... I would run .5" offset wheels instead of 0, but the wheels should come in with the truggies... |
|
| Author: | 180 booker [ Fri Mar 23, 2007 03:01:23 ] |
| Post subject: | |
| Author: | lotter [ Fri Mar 23, 2007 11:23:02 ] |
| Post subject: | |
I see an option part hello extending wheel hubs... |
|
| Author: | Rocco Margiotta [ Fri Mar 23, 2007 16:39:49 ] |
| Post subject: | |
| Author: | PAPA [ Fri Mar 23, 2007 16:42:42 ] |
| Post subject: | |
| Author: | Rocco Margiotta [ Fri Mar 23, 2007 16:45:35 ] |
| Post subject: | |
| Author: | Rocco Margiotta [ Fri Mar 23, 2007 16:47:08 ] |
| Post subject: | |
| Author: | PAPA [ Fri Mar 23, 2007 16:51:06 ] |
| Post subject: | |
Next question.... What is the pin size that holds the hub on? I know an extended hub is not the best solution, however, when one, "me" has eight sets of UMT tires mounted, it would be nice to be able to adapt one. 
I have these in mind. 9MM Adapters By DACE. |
|
| Author: | Rocco Margiotta [ Fri Mar 23, 2007 17:02:38 ] |
| Post subject: | |
It's a 3x17mm pin. |
|
| Page 19 of 52 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|