| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Suggest to XRAY which XB8 / XT8 Option Parts you wish? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=600 |
Page 2 of 34 |
| Author: | The Machine [ Sun Dec 12, 2004 01:29:06 ] |
| Post subject: | |
| Author: | xrated [ Sun Dec 12, 2004 03:06:48 ] |
| Post subject: | |
The first things I think we need to see are Better bushings (no more plastic) Better/Stronger turnbuckles aluminum shock tops (no more plastic) Front chasis brace One piece engine mount CNC knuckles aluminum sterring servo mount I do belive the first three are a must and the others would just be nice.. |
|
| Author: | Dave_D [ Sun Dec 12, 2004 18:59:56 ] |
| Post subject: | |
| Author: | Katja Brammertz [ Sun Dec 12, 2004 21:11:40 ] |
| Post subject: | |
| Author: | fearsome [ Mon Dec 13, 2004 08:00:14 ] |
| Post subject: | |
1. One piece engine mount with engine mounting holes tapped all the way through so you can use longer screws to prevent stripping. 2. more options for shock spring softer 3. optional wider wheel hub hex (like the GS storm option) the XB8 is much narrower than any other car and this can be a good and bad thing. Make it a tuning option! 
4. new front C-hubs for more front down travel and steering throw. 5. new tank with overspill drainage to bottom of chassis. |
|
| Author: | Bob The Builder [ Mon Dec 13, 2004 10:18:21 ] |
| Post subject: | |
1. Machined front brace - like the rear 2. 1 piece engine mount 3. Titanium screw set 4. All alloy shock caps |
|
| Author: | florianlaux [ Mon Dec 13, 2004 11:46:38 ] |
| Post subject: | |
Hey, that`s nice... Here my Top Ten: 1. sealed Radio Box - the stock one is not waterprooft - even sand goes in 2. Torson or tractionlimited diffs 3. Better shockboots - maybe somethinglike in the real cars 4. Titanium screw set 5. more available springs 6. Motorholder like Kyosho 7. Clutch that can be adjusted from outside 8. Failsave spring 9. Monster Truck conversion.....luxury Monster would be nice... 10. ballbearings for the brakes |
|
| Author: | TonyM [ Mon Dec 13, 2004 13:01:40 ] |
| Post subject: | |
- adjustable 2 shoe carbon clutch - central Cardan joints in aluminum - titanium screw set anodized color Blue - front Torsen diff. - little pocket setup guide - Motor .21 xray - hudy |
|
| Author: | Greg [ Mon Dec 13, 2004 16:56:42 ] |
| Post subject: | |
- Torsen Front Dif - Plastic Molded Spur Gear (to reduce rotating weight) - One piece engine mount (with alignment system for spur gear) - Epoxy or Carbon Disk Brakes - 44 T spur Gear - Aluminium made Front Upper suspension Holder - Rear - Steering Turnbuckle spring harder - one piece absorber cap (aluminium) - Rear dogbones shafts |
|
| Author: | POLO [ Mon Dec 13, 2004 19:38:21 ] |
| Post subject: | MY TOP 10 OPTIONS |
| Author: | z-man [ Mon Dec 13, 2004 22:50:01 ] |
| Post subject: | |
| Author: | David Joor [ Tue Dec 14, 2004 01:03:53 ] |
| Post subject: | |
| Author: | sparx [ Tue Dec 14, 2004 01:49:43 ] |
| Post subject: | |
| Author: | atm92484 [ Tue Dec 14, 2004 02:13:22 ] |
| Post subject: | |
| Author: | livthemoment [ Tue Dec 14, 2004 03:25:57 ] |
| Post subject: | |
| Author: | Backfire [ Tue Dec 14, 2004 05:03:12 ] |
| Post subject: | |
| Author: | Dave_D [ Tue Dec 14, 2004 06:22:20 ] |
| Post subject: | |
| Author: | Goliath [ Tue Dec 14, 2004 06:23:24 ] |
| Post subject: | |
| Author: | David Joor [ Tue Dec 14, 2004 06:36:15 ] |
| Post subject: | |
| Author: | z-man [ Tue Dec 14, 2004 12:45:43 ] |
| Post subject: | |
| Page 2 of 34 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|