XRAY - Model racing cars

ok thanks i may pop out for some, does it last a few meetings or do i have to open em up and keep applying it?

also is there anyone who doesnt use anything?

Ronaldo,

It runs a lot smoother with the lithium grease and the lithium grease take a hell of a lot of heat and pressure.

Take the seals off of your wheel bearings carefully and fill with the lithium grease as well. They'll last for ages ask Daz.fx.

Tim

is this the gear lads

I'd say so mate.

The LM grease I use was ?3.50 for a 500g tub ~ it says on the back:
LM Grease High Melting Point - A multipurpose top quality lithium based grease with outstanding high temp stability, suitable for most automobile applications inc wheel bearings, hubs, CV/universal joints, chassis and general greasing.

I've had this tub for about 5 years and it has a quarter of a tub left, I use it on my model cars and 1:1 car

I picked up a can of "Pennzoil Premium Bearing Grease" at my local Auto parts store for $5.95 for 14 oz. a couple years ago. Still have 1/2 a can now. This grease has work great for all purposes. I use it to repack my bearings after there cleaning, grease the Pinion/Bevel gear, and seal the bottom of the diff case to the chassis with it. I totally cleaned out a old bottle of Diff oil and use that to apply it. This grease looks, feels and smells the same as XRAY's Premium grease. I don't think its exactly the same, but very close, and has worked great for myself and a few others I race with.

http://www.pennzoil.com/products/grease ... 7_red.html