XRAY - Model racing cars

Go to the setup sheets and set your car up useing Daryl's loose rear cure. It works! My TQ was also really loose in the rear and when I set it up like he said it handled great. I ended up setting my shocks alittle more upright, and still using the aluminum front brace where he said to use the plastic one. I can steer this car anywhere at any speed and it stays hooked and is stable everywhere. I also am running quit a bit of spring preload, I'm using the 5 & 6 shim spacers in the back and the 4 & 6 in the front. The car sits high, but seems to put the power to the ground better. If you like I can post my exact set up. There isn't a car on our track that I can't drive under in a corner. I fought this car for months, almost gave up, but now I wouldn't trade it for anything.

Yes, could you please post your. I put the setup in the car that you were talking about (with a few modifications) and, it seemed to be better. I would like to try yours if you dont mind.

Thanks

I told you it would work.




Daryl

xform/index.php?act=view&ID=317&setup=xb8tq

Play around with the shock position and spring preload to get even more traction and steering. It worked for my driving style. Thanks Daryl.