XRAY - Model racing cars

One of the easiest ways to get more off power steering is to lower the front ride height or raise the rear ride height so you will have more front "rake".

more kick up will drop the front when you let of the throttle and then you got some steering, but there is a trade off but small.

I had the same problem. First thing i did for off-power steering was adjust the front camber link. Put the outside of the link on the inner hole causing it to bite on the tire more.

I also softened the shock oil and i run overall 2 degrees of toe out. I have awesome off-power steering now and its exiting of a corner is unreal, i gain seconds on any other buggy from corner exits.

But in doing this i lost some on-power steering. I was running full / maximum front droop. I limited this by half and now only running %50 front droop so the front end isnt facing the sun when on the gas. I now have awesome on and off power steering.

Goodluck
JK

Clint, before you change a lot of stuff, go practice with it. Those changes we made will make it a lot better. The reason you don't have as much offpower is you haven't dremeled the arms/hubs/knuckles. Once you do that it will be night and day. I'll be out there a lot this week if you want to come out and run; I'll help you out and we'll get it how you like it. Just call me.

dude you can also try running a 2.2 mm sway bar on the front help me out heaps...

Thanks for the suggestions guys. Adam, I'm going to dremel those places we discussed and see what happens from there.