XRAY - Model racing cars

check this one should help a bit a few changes but close to basic "Baseline set up"

Oh, and 0 deg. of toe in front from the tie rods...so straight no toe in or out...
and rear hubs forward...everything else should get you in the "Ball Park"
now after around 17 different tracks from 8 different states this one works pretty well to start but still may need to do some "Small" changes to find "Your" set up that will work for you...
alot of guys that drive for us say the step pins of different Manufactures seem to work pretty well...but will depend on the track conditions...
and if the O-rings are still in the diffs take them out...
and set the "Chassis" level so regardless where the arms sit make from the side veiw the chassis level....
hope this will help a little.....