| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| EVO2 Rear Tower https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=994 |
Page 1 of 1 |
| Author: | Col [ Mon Feb 07, 2005 16:17:23 ] |
| Post subject: | EVO2 Rear Tower |
| Author: | Rick Thomson [ Mon Feb 07, 2005 17:16:47 ] |
| Post subject: | |
| Author: | Col [ Mon Feb 07, 2005 17:29:19 ] |
| Post subject: | Hmm |
| Author: | projectnmt [ Mon Feb 07, 2005 18:10:34 ] |
| Post subject: | |
| Author: | Col [ Mon Feb 07, 2005 18:29:08 ] |
| Post subject: | Top an bottom |
| Author: | projectnmt [ Mon Feb 07, 2005 18:39:44 ] |
| Post subject: | |
| Author: | Col [ Mon Feb 07, 2005 18:50:00 ] |
| Post subject: | Heh |
| Author: | XUTOS [ Sat Feb 12, 2005 03:00:43 ] |
| Post subject: | Evo 2 |
| Author: | Col [ Sat Feb 12, 2005 10:20:43 ] |
| Post subject: | XAUTOS |
| Author: | projectnmt [ Mon Feb 14, 2005 10:14:10 ] |
| Post subject: | |
| Author: | Col [ Mon Feb 14, 2005 11:52:10 ] |
| Post subject: | Excellent :) |
| Author: | projectnmt [ Mon Feb 14, 2005 13:48:25 ] |
| Post subject: | |
Col, if you still have the original kit 6mm "tube" spacers you shouldn't need to order anything. If not you will need to combine 4mm and 2mm caster clips to get the clearance (really? 4+2=6 !!!) If anyone is interested the modified shock tower I am now running was produced by bolting together 2 stock FK shock towers using different camber link holes and using the original shock mount holes as templates. Pictures speak a thousand words ..... I can now run using the inner holes (so the foams don't rub on the shock bottom) and easily get a 4mm ride height. Rob |
|
| Author: | Col [ Mon Feb 14, 2005 16:10:48 ] |
| Post subject: | Good work ! |
| Author: | projectnmt [ Mon Feb 14, 2005 16:38:37 ] |
| Post subject: | |
They are as short as I could possibly make them. I can't remember the exact length off of the top of my head - all I can remember is screwing the ball end on as much as I could without introducing any binding! I'll try and remember to post the measurement for you. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|