| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Shock rebound for Carpet track with rubber tyres https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=9929 |
Page 1 of 1 |
| Author: | WEBBY1977 [ Sun Nov 29, 2009 14:55:46 ] |
| Post subject: | Shock rebound for Carpet track with rubber tyres |
Im racing 13.5 with the T2 009, I use the foam bit above the bladder at the moment and normaly get above 50 % rebound, I dont try to achieve this thats just how the come out after I build them lol. I would like to know whould I be better off not using the foam bit and how much rebound some I use ?? Also what difference does rebound make and how do you know when to use more or less ?? Thanks for any advise |
|
| Author: | racerlog [ Sun Nov 29, 2009 16:15:04 ] |
| Post subject: | |
I'd recommend removing the foam and getting your shocks to near 0 rebound. you can use a small drill bit and drill behind the bladder. |
|
| Author: | cs-james [ Sun Nov 29, 2009 16:49:23 ] |
| Post subject: | |
I hope this does not seem like a stupid question, but assume you drill a hole in the plastic cap. how big of a hole? Do you then bleed the shock the same way from the bottom? |
|
| Author: | Hagberg [ Mon Nov 30, 2009 03:01:59 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|