XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Using 34T pullies in the T3 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=9892 |
Page 1 of 1 |
Author: | whiskey 1 [ Fri Nov 20, 2009 02:56:28 ] |
Post subject: | Using 34T pullies in the T3 |
Author: | Dodgeguy [ Fri Nov 20, 2009 05:18:33 ] |
Post subject: | |
Author: | John Pape [ Mon Nov 23, 2009 22:07:34 ] |
Post subject: | |
Using the 34t pulleys with a 104 spur and 34 pinion, you get 4.9 overall ratio. You can of course achieve the same ratio with 38t pulleys but you will need to run a 40t pinion with a 104 spur. |
Author: | brano [ Wed Nov 25, 2009 18:52:51 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |