XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T1 shocks https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=9787 |
Page 1 of 1 |
Author: | hiflying12 [ Mon Oct 26, 2009 19:14:12 ] |
Post subject: | T1 shocks |
Author: | Damo [ Fri Oct 30, 2009 04:45:38 ] |
Post subject: | |
Hi T2 Shocks will fit at T1 (Unless you have a very early T1) as T1 and T2 shocks use the same parts. Springs are also the same. Best bet is to get a set from a T2 006 or 007 as the Later T2 (008 and 009) use a Shorter Shock body and shafts Note on the T1 you have to build the shocks using the "Longer" Shock Ball joints which you get on the frame of the nylon components - You can re-use the ball fixing for the lower wishbone from your old ball joints, just cut it out Part no for the nylon components is XR308330 I used my old T2 006 Shocks on my T1 FK04 with no problems Hope this helps Damo |
Author: | hiflying12 [ Fri Oct 30, 2009 10:26:50 ] |
Post subject: | T1 shocks |
Thank you very much. I are missing the 2 rears. ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |