XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
One-way Pulley with front spool?? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=9683 |
Page 1 of 1 |
Author: | Ruben_qlc [ Thu Sep 17, 2009 21:30:30 ] |
Post subject: | One-way Pulley with front spool?? |
Author: | David_Ehrbar [ Fri Sep 18, 2009 10:25:11 ] |
Post subject: | |
I don't think that this is your problem. What motor do you use? rubber tires on asphalt? I don't think the oneway pulley will help you in any way. I also think that the oneway pulley doesn't fit the T2'009. |
Author: | Ruben_qlc [ Sat Sep 19, 2009 00:30:20 ] |
Post subject: | |
Author: | David_Ehrbar [ Sat Sep 19, 2009 15:48:12 ] |
Post subject: | |
Author: | Ruben_qlc [ Sat Sep 19, 2009 16:14:36 ] |
Post subject: | |
Author: | David_Ehrbar [ Sat Sep 19, 2009 17:45:23 ] |
Post subject: | |
Author: | wilabidd [ Sun Sep 20, 2009 09:41:24 ] |
Post subject: | |
Author: | wilabidd [ Sun Sep 20, 2009 09:56:53 ] |
Post subject: | |
Author: | wilabidd [ Sun Sep 20, 2009 10:06:35 ] |
Post subject: | |
Author: | Ruben_qlc [ Sun Sep 20, 2009 13:30:48 ] |
Post subject: | |
Author: | David_Ehrbar [ Sun Sep 20, 2009 20:04:32 ] |
Post subject: | |
Author: | Ruben_qlc [ Sun Sep 20, 2009 20:10:06 ] |
Post subject: | |
Author: | David_Ehrbar [ Mon Sep 21, 2009 09:56:40 ] |
Post subject: | |
Author: | Ruben_qlc [ Tue Sep 22, 2009 01:20:27 ] |
Post subject: | |
Author: | David_Ehrbar [ Tue Sep 22, 2009 13:18:51 ] |
Post subject: | |
Author: | Ruben_qlc [ Tue Sep 22, 2009 17:19:42 ] |
Post subject: | |
Author: | Martin Hudy [ Tue Sep 22, 2009 18:04:55 ] |
Post subject: | |
Author: | Michael Jones [ Wed Sep 23, 2009 23:45:07 ] |
Post subject: | |
Try the longest wheelbase setting and also use anti dive at the front. Your diff should not slip at all when you try and turn it with your hands (with the outdrives locked) but the diff action must be as free as possible. Mike |
Author: | Ruben_qlc [ Mon Sep 28, 2009 13:55:18 ] |
Post subject: | |
Author: | YELLOWSHARK [ Tue Sep 29, 2009 20:34:51 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |