| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Stock Motor Gearing https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=968 |
Page 1 of 1 |
| Author: | JamesA [ Thu Feb 03, 2005 12:14:43 ] |
| Post subject: | Stock Motor Gearing |
Hi, I am going to have a go at stock, i was hoping somebody could advise me on a gear ratio. I have a T1FK (Low ratio), and a Demon P2K 27T Stock motor. Gonna be racing on rubber tyres on a tightish carpet track. I would gear my 10 turn on 18/96. What gearing do you guys that race at Don Valley use? Cheers James |
|
| Author: | Dave Treacy [ Thu Feb 03, 2005 13:55:50 ] |
| Post subject: | |
James, we run on a carpet track which is 20m x 10m and gear at 22/96 or 21/93 depending on layout. |
|
| Author: | projectnmt [ Thu Feb 03, 2005 15:05:22 ] |
| Post subject: | |
I race on a very tight carpet track with the same motor and run around 8 overall gear ratio |
|
| Author: | MR JOLLY [ Thu Feb 03, 2005 15:08:18 ] |
| Post subject: | |
i don`t use p2k jobbies but i do use a monster @ 9.8-10.1 FDR on 3 indoor racing clubs ,t27`s down here in cold kent |
|
| Author: | Eddie M [ Thu Feb 03, 2005 19:55:31 ] |
| Post subject: | |
I ran 7.1 ratio with monster stock on this track two weeks ago |
|
| Author: | rcflyers [ Thu Feb 03, 2005 23:22:23 ] |
| Post subject: | |
| Author: | mattthegreat01 [ Fri Feb 04, 2005 21:21:09 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|