XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Rear body posts T1:T2 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=9676 |
Page 1 of 1 |
Author: | FOXY923 [ Tue Sep 15, 2009 05:17:44 ] |
Post subject: | Rear body posts T1:T2 |
Author: | FOXY923 [ Wed Sep 16, 2009 04:51:50 ] |
Post subject: | |
Anybody know? I need an answer soon. Thanks |
Author: | calvin [ Fri Sep 18, 2009 10:00:56 ] |
Post subject: | |
Author: | FOXY923 [ Fri Sep 18, 2009 13:52:07 ] |
Post subject: | |
Thanks. It is for a new body. Seems VTA bodies need longer posts than TC bodies. In the front I was off by one hole ![]() |
Author: | calvin [ Fri Sep 18, 2009 14:09:24 ] |
Post subject: | |
If length is the problem, it seems that the shock mount hole layout may be somewhat standardized between brands. I know that I have some HPI (sorry don't know the part numbers - had them for years) rear body mount posts that are 3 inches long and will mount perfectly to the T1/T2 shock towers. Might check with your local hobby shops if the XRay units are too short to see what you can find that will work for you. |
Author: | FOXY923 [ Fri Sep 18, 2009 15:59:07 ] |
Post subject: | |
They won't be too short when I have new ones. My old ones were cut down so there is only 1 hole above the one the body clip goes into. I hate the look of long body posts. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |