XRAY - Model racing cars

The rear wheels: after turning 1/5th the inner spokes catch/foul on the lower part of the hub. The spokes are level with the hex location and thus foul.

The front wheels: are fine untill they turn then the inner rims foul on the Suspension Arm.

Using Offset wheel hubs are only max 1.5mm extra this I don't think is enough to remedy this.

On the inside of the rim they say "Standard Offset"????

Have I just got the wrong wheels?

I thought all 1:10 scale Touring Class wheels were OK.

Anyhow what wheels can I use with the Exay