| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Ceramic Berrings for the Xray T1R https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=9234 |
Page 1 of 1 |
| Author: | wiscnitro [ Sun May 17, 2009 05:25:10 ] |
| Post subject: | Ceramic Berrings for the Xray T1R |
Is there anyone that makes Ceramic Berrings for the T1R? the only ones I found are through Acer Racing but it was for the T1 Factory and by the photo of the car its a completely diffrent car so I don't know what parts will cross and work on the T1R. I don't want to order a kit and find out that alot of the berrings wont fit. can someone give me a link or let me know what will and wont work. Thank you, Chris 
|
|
| Author: | Damo [ Mon May 18, 2009 03:26:07 ] |
| Post subject: | |
| Author: | wiscnitro [ Mon May 18, 2009 07:28:50 ] |
| Post subject: | |
cool thanks for that info. I wonder if the kit also comes with the berrings for inside the ball diff.the thrust berrings and the I believe 2 berrings that ride on the inner out drives 5x8x2.5 (2) |
|
| Author: | Damo [ Tue May 19, 2009 02:24:08 ] |
| Post subject: | |
Hi The Kit does not come with the thrust bearings, so you have to get these seperatly. IMHO you dont need them - The XRAY stock ones are fine, and I am still on my original ones. I would only replace them if they fell out of the cage, or your diff became very notchy Damo |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|