| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Rear end letting go https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=8875 |
Page 1 of 1 |
| Author: | chris_dono [ Wed Feb 25, 2009 00:27:13 ] |
| Post subject: | Rear end letting go |
| Author: | 1stGenCRXer [ Wed Feb 25, 2009 15:24:52 ] |
| Post subject: | |
If you like how it handles in all but off-throttle steering, the hudy setup manual suggest a softer rear roll bar, or a lower roll center, but my personal first step is to give yourself some more rear droop. Try a mm less rear downstop at a time and see if that helps your situation. |
|
| Author: | Freddy-Südhoff [ Wed Feb 25, 2009 16:55:25 ] |
| Post subject: | |
Yes, try to use more rear droop. Front 6 and 5 rear. Maybe also 3,5° toe in in rear. I would also use the central alu stand and normal topdeck in front and rear. Ackermann position 4 could be also to much. Try here position 2. Think this things will help you a lot. Regards Freddy |
|
| Author: | Hagberg [ Wed Feb 25, 2009 17:07:56 ] |
| Post subject: | |
You are using a lot of chassis flex. Try to put in all screws except the one under the motor mount. You might also want to use 1.5mm shims instead of 1.15 for the front suspension holders. |
|
| Author: | chris_dono [ Wed Feb 25, 2009 21:01:04 ] |
| Post subject: | |
| Author: | sleepyhead [ Mon Mar 09, 2009 21:02:35 ] |
| Post subject: | |
| Author: | chris_dono [ Mon Mar 23, 2009 15:52:50 ] |
| Post subject: | |
| Author: | chris_dono [ Fri Jun 26, 2009 10:32:20 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|