| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| How would a one way setup differ from a spool setup? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=8813 |
Page 1 of 1 |
| Author: | Lee Dyson [ Fri Feb 13, 2009 12:36:30 ] |
| Post subject: | How would a one way setup differ from a spool setup? |
Hi, I currently run a spool in my xray, indoors on rubberised althlete running track floor and carpet at other places using rubber Vtec 27r tyres. Id like to use a one way as part of increasing corner speed and reducing drivetrain wear as a bonus. I race in the stock class (13.5). Im guessing Id want to use more droop (wishbones angled more downwards) on the front. Moving the rear wishbones forwards so more weight in on the rear wheels through all stages of the turn .Are these good ideas or am I completely wrong? Is there anything else I should change when using a one way or should I really just put the car on the track with a one way in with my spool setup, see how it handles and make adjustments from there? Also is 2 degrees toe in on the rear too little to use when using a one way? Thanks Here is my spool setup its a Xray T2'007 |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|