XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Xray 2009 DHI Cup Teemu Leino https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=8744 |
Page 1 of 2 |
Author: | NunoGancho [ Thu Jan 29, 2009 14:40:34 ] |
Post subject: | Xray 2009 DHI Cup Teemu Leino |
Is those yelow bearing from Boca bearing? And is there some new roll center, the normal is 303032-O, those in the car is black and has writen H1 and H2 at rear and L1 and L2 in front. http://events.redrc.net/wp-content/gall ... xray-2.jpg http://events.redrc.net/wp-content/gall ... noxray.jpg link redrc events galary, page 8 and 9 |
Author: | Tricksy [ Thu Jan 29, 2009 20:31:31 ] |
Post subject: | |
those turn buckles are trick ![]() that was a fantastic spot on the bearings wow it took me ages to find those in that pic lol |
Author: | Edwin Pibal [ Fri Jan 30, 2009 00:09:54 ] |
Post subject: | |
the Bearings i get are from Avidrc, they are the same yellow, so i can only assume they are too. Ed |
Author: | rx7ttlm [ Fri Jan 30, 2009 05:56:06 ] |
Post subject: | |
Author: | rx7ttlm [ Fri Jan 30, 2009 06:01:29 ] |
Post subject: | |
Author: | NunoGancho [ Fri Jan 30, 2009 11:04:36 ] |
Post subject: | |
Author: | eyde [ Fri Jan 30, 2009 13:15:55 ] |
Post subject: | |
Author: | MattWinyard [ Fri Jan 30, 2009 13:49:35 ] |
Post subject: | |
Author: | Peakki [ Sun Feb 01, 2009 16:59:13 ] |
Post subject: | |
Author: | NunoGancho [ Mon Feb 02, 2009 01:03:11 ] |
Post subject: | |
Author: | Peakki [ Mon Feb 02, 2009 20:29:02 ] |
Post subject: | |
Plastic diff is lighter and that T2R one had D-rings and it is a bit smoother. Well RC changes with those links and if I understood correctly car has more grip. |
Author: | Gary Lanzer [ Mon Feb 02, 2009 22:49:58 ] |
Post subject: | |
This is the same idea as the TC5 guys used, although they moved the mount to one of the upright holes that holds the shock tower in place, still same idea though, longer link for more traction. |
Author: | rx7ttlm [ Tue Feb 03, 2009 04:33:35 ] |
Post subject: | |
Author: | Ronaldo808 [ Tue Feb 03, 2009 05:54:50 ] |
Post subject: | |
Author: | mario [ Tue Feb 03, 2009 10:24:55 ] |
Post subject: | |
Author: | Peakki [ Wed Feb 04, 2009 15:22:41 ] |
Post subject: | |
Author: | rx7ttlm [ Thu Feb 05, 2009 04:34:30 ] |
Post subject: | |
Author: | MattWinyard [ Thu Feb 05, 2009 10:34:30 ] |
Post subject: | |
Just found out from a reliable source, the different roll centres are 2mm longer link and 1mm higher inboard.... Makes it the same as a Tamiya 416 Still not sure about L&H though, maybe Low and High? Whats front and rear in Slovakian? lol |
Author: | benoitrdv [ Thu Feb 05, 2009 20:40:24 ] |
Post subject: | |
Author: | mario [ Thu Feb 19, 2009 18:55:16 ] |
Post subject: | |
Page 1 of 2 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |