| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| How high do you run your bodyshells from the ground ?? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=8735 |
Page 1 of 1 |
| Author: | Ronaldo808 [ Mon Jan 26, 2009 18:11:32 ] |
| Post subject: | How high do you run your bodyshells from the ground ?? |
i would like to know how everyone sets the bodyshells?? mines 9mm rear 8mm front  is this too high?? also just realised its a little higher than the chasiss itself. would you all say the general rule is to have it flush with the botom of the chasiss.
would it increase handling if i go lower of is there nothing in it?? |
|
| Author: | Hagberg [ Tue Jan 27, 2009 11:29:33 ] |
| Post subject: | |
| Author: | Tricksy [ Tue Jan 27, 2009 12:12:03 ] |
| Post subject: | |
| Author: | Ronaldo808 [ Wed Jan 28, 2009 11:46:20 ] |
| Post subject: | |
cheers guy so what holes on the body post are you using for say a mazda speed ?? also any uk guy taking advantage of the brca trim lines 
|
|
| Author: | breyman [ Wed Jan 28, 2009 15:31:10 ] |
| Post subject: | |
also find a bubble level and put it on the roof to the back of the wing it has to be level if not you have to cut down some of the wing i went to a big race got naild for it being to high |
|
| Author: | PDX-Spike [ Fri Jan 30, 2009 08:14:21 ] |
| Post subject: | |
| Author: | Ronaldo808 [ Tue Feb 03, 2009 06:00:21 ] |
| Post subject: | |
| Author: | rx7ttlm [ Tue Feb 03, 2009 06:20:34 ] |
| Post subject: | |
| Author: | blue247carz [ Wed Feb 04, 2009 22:44:47 ] |
| Post subject: | |
Hi Guys, when I mount my bodyshells I basically mount the front of the shell as close to the front bumper as possible. So in effect the shell is mounted as far rearwards as possible, is this correct? I have seen people mount them further forwards and stick extra foam to the bumper to fill the gap. Does it make any difference? Cheers Paul |
|
| Author: | Lee Dyson [ Fri Feb 13, 2009 12:45:03 ] |
| Post subject: | |
| Author: | RGonzalez [ Fri Feb 13, 2009 19:58:38 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|