| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T2 009 servo link problem https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=8694 |
Page 1 of 1 |
| Author: | BILKO1 [ Mon Jan 19, 2009 00:09:30 ] |
| Post subject: | T2 009 servo link problem |
| Author: | adamg [ Mon Jan 19, 2009 01:18:11 ] |
| Post subject: | |
| Author: | Tricksy [ Mon Jan 19, 2009 07:48:57 ] |
| Post subject: | |
i got this idea from the forum somewhere what i did was swapped out the turnbuckle and used a long grub screw to join the two servo arms together that made the whole unit short enough for me to get close to the 90 angle i needed to archive. that servo is a orion vortex heres a poor mobile phone pic hope that helps |
|
| Author: | rx7ttlm [ Mon Jan 19, 2009 08:16:16 ] |
| Post subject: | |
lundsford and several companies make 3mm turn buckles that work well for this, you simply shorten the ball cups accordingly. The bonus is that you can zero your sub trim and steering trim and set the bellcrank to center with the turnbuckle rather than electronic trims.. Just how I prefer to do it.. cheers |
|
| Author: | BILKO1 [ Mon Jan 19, 2009 15:24:13 ] |
| Post subject: | |
| Author: | WEST [ Tue Jan 20, 2009 11:15:00 ] |
| Post subject: | |
| Author: | rx7ttlm [ Tue Jan 20, 2009 12:23:11 ] |
| Post subject: | |
| Author: | BILKO1 [ Tue Jan 20, 2009 13:57:36 ] |
| Post subject: | |
| Author: | WEST [ Tue Jan 20, 2009 21:16:11 ] |
| Post subject: | |
| Author: | BILKO1 [ Wed Jan 21, 2009 04:30:35 ] |
| Post subject: | |
| Author: | WEST [ Wed Jan 21, 2009 11:00:59 ] |
| Post subject: | |
| Author: | teamsanwa [ Wed Jan 21, 2009 18:35:04 ] |
| Post subject: | Re: T2 009 servo link problem |
| Author: | WEST [ Wed Jan 21, 2009 22:23:29 ] |
| Post subject: | |
| Author: | Phil C [ Thu Jan 22, 2009 01:38:03 ] |
| Post subject: | |
| Author: | WEST [ Fri Jan 23, 2009 00:47:02 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|