XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Brushless Vs Normal Motor - How it affects the handling https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=846 |
Page 1 of 1 |
Author: | fooyukvoon [ Tue Jan 18, 2005 17:41:19 ] |
Post subject: | Brushless Vs Normal Motor - How it affects the handling |
Author: | psyco [ Wed Jan 19, 2005 03:42:59 ] |
Post subject: | |
Author: | fooyukvoon [ Wed Jan 19, 2005 07:59:49 ] |
Post subject: | |
Author: | psyco [ Thu Jan 20, 2005 04:02:26 ] |
Post subject: | |
I have been told that you can dial in dragbrake but this puts a dead spot arround neutral.I learned how to adjust my driving style without doing that. |
Author: | fooyukvoon [ Thu Jan 20, 2005 09:49:05 ] |
Post subject: | |
Author: | psyco [ Tue Jan 25, 2005 05:09:01 ] |
Post subject: | |
Author: | fooyukvoon [ Tue Jan 25, 2005 16:40:57 ] |
Post subject: | |
Author: | psyco [ Sun Jan 30, 2005 00:42:22 ] |
Post subject: | |
Here is what I ran last night :Take Off CS 22,TQ Orange traction compound-full rear Inside 1/2 front,Novak 5800 Brushless with 96S/23Pand Protoform Nemises(Status 2.0 front & Masda 6 rear) and lost by 6.2 seconds to a 10 single Orion V2 on Foam. Running 1 Deg camber on all corners, 3m caster, 25 sping 30w oil 2 holes on front and 22.5 spring 30w oil 3 holes on rear. 2deg rear toe in and 1mm toe out on front. I am still tweeking the setup, the chassis setting are to the manual. |
Author: | fooyukvoon [ Mon Jan 31, 2005 15:09:40 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |