| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T2008 Drive shafts with cap wont fit Multi Diff, HELP! https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=8361 |
Page 1 of 1 |
| Author: | Vancity_Drifter [ Thu Oct 16, 2008 01:58:33 ] |
| Post subject: | T2008 Drive shafts with cap wont fit Multi Diff, HELP! |
Hi, first time owning and building an Xray, I have the Us edition. I recently bought a multi diff Part #305102 i put the plastic caps on the ends of the outdrives as per instruction manual. but when putting them in the multidiff outdrive they won't fit. why is this. pictures below to describe my problem. please help i need this car ready for mid next week. thank you. do i even need the cap? it says with the multi diff i must have the caps on but there are no further instructions. picture of caps installed see, they wont fit the outdrive of the multidiff they fit the regular outdrive just fine. |
|
| Author: | adamg [ Thu Oct 16, 2008 02:46:48 ] |
| Post subject: | |
| Author: | Vancity_Drifter [ Thu Oct 16, 2008 02:54:14 ] |
| Post subject: | |
| Author: | Vancity_Drifter [ Thu Oct 16, 2008 03:18:52 ] |
| Post subject: | |
| Author: | adamg [ Thu Oct 16, 2008 20:18:49 ] |
| Post subject: | |
| Author: | Mr.B9471 [ Fri Oct 17, 2008 14:02:31 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|