XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Servo Saver Spring Tension https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=793 |
Page 1 of 1 |
Author: | 1jag8 [ Tue Jan 11, 2005 05:23:04 ] |
Post subject: | Servo Saver Spring Tension |
Author: | Tonyv [ Tue Jan 11, 2005 10:44:49 ] |
Post subject: | |
Author: | 1jag8 [ Tue Jan 11, 2005 20:40:37 ] |
Post subject: | |
Author: | 1jag8 [ Wed Jan 12, 2005 00:19:03 ] |
Post subject: | |
OK here's what I did. I took an axle spacer (5.0mm ID x .5mm) and put it under the E clip that holds the saver together. This put an extra pre load on the spring and seems to have made the saver a little stiffer. I have yet to try it on the track...... maybe this weekend. |
Author: | scmicromike [ Fri Jan 14, 2005 01:06:35 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |