| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Lipo Fitment https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=7570 |
Page 1 of 1 |
| Author: | littleal [ Sat Apr 26, 2008 22:05:26 ] |
| Post subject: | Lipo Fitment |
Can one of the xray guys confirm if only the 6 cell chassis 008 can take a 4900 lipo, or can the 5 cell version as well? Many thanks |
|
| Author: | micke_b [ Sun May 04, 2008 10:42:50 ] |
| Post subject: | |
With a little modifications: Add .5 mm to topplate, flip inner battery monuts, flip battery mount cornes, make a rod, buy xray battery holder, and your done. 
This mod also gets the lipo further out, which is good fo your left/right balance of the car, and also gets cleared out of the way for the pinion.
|
|
| Author: | binary [ Mon May 05, 2008 04:59:55 ] |
| Post subject: | |
| Author: | littleal [ Mon May 05, 2008 22:26:44 ] |
| Post subject: | |
| Author: | binary [ Tue May 06, 2008 02:49:41 ] |
| Post subject: | |
| Author: | Mr.B9471 [ Thu May 08, 2008 23:01:43 ] |
| Post subject: | |
| Author: | FOXY923 [ Thu May 08, 2008 23:14:58 ] |
| Post subject: | |
| Author: | bomber [ Mon May 19, 2008 10:07:29 ] |
| Post subject: | |
| Author: | danomytt [ Mon May 19, 2008 20:43:10 ] |
| Post subject: | |
| Author: | YELLOWSHARK [ Tue May 20, 2008 09:06:55 ] |
| Post subject: | |
| Author: | FOXY923 [ Tue May 20, 2008 23:52:59 ] |
| Post subject: | |
| Author: | YELLOWSHARK [ Wed May 21, 2008 00:26:19 ] |
| Post subject: | |
| Author: | FOXY923 [ Wed May 21, 2008 03:52:03 ] |
| Post subject: | |
| Author: | Salinet [ Thu Jun 05, 2008 23:35:52 ] |
| Post subject: | |
Now you can use the LiPo Tray from Bittydesing. Have you ever seen their LiPo tray? ___________________ Flavio Salinet FS MODELSPORT www.fsmodelsport.com |
|
| Author: | FOXY923 [ Fri Jun 06, 2008 05:30:01 ] |
| Post subject: | |
| Author: | FOXY923 [ Fri Jun 06, 2008 05:32:27 ] |
| Post subject: | |
Here's my T2 with lipo... |
|
| Author: | Salinet [ Fri Jun 06, 2008 13:41:03 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|