XRAY - Model racing cars

You can try adding a front anti-roll bar or harder springs front. Also reduce your front droop as this will reduce the chassis roll as well.

Your problem is the car diving too much into the corner transfering too much weight onto the outside front wheel. While adding rear droop will allow the arms to drop further, it also allows more weight to be transferred to the front. You may need to ******** [:oops: should´ve said "decrease" off course] rear droop instead of ******** [and "increasing"] it (there is no set answer in this case).

do you mean reduce rear droop eg the droop screw screwed down more to try and stop the rear end lifting


also could i try front antidive this would stop the front diving in

cheers tony