| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Setup Help https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=7408 |
Page 1 of 1 |
| Author: | pilot [ Thu Apr 03, 2008 07:08:45 ] |
| Post subject: | Setup Help |
I need more corner speed, thats were I'm losing other cars on the track, my current setup is consistant and easy to drive I just don't carry enough speed through the corners. I would like to know how to adjust the setup for more corner speed. The track I run on is almost identical in size and layout to the '07 IIC Las Vegas race. Any help or advice would be greatly appreciated, thank you. xform/index.php?act=view&ID=1721&setup=t2 |
|
| Author: | teamgp [ Thu Apr 03, 2008 15:32:36 ] |
| Post subject: | |
Looking at your setup, I'd hazard a guess that the car is acting like its plowing snow with a shovel in the corners. This is due to the use of a spool with front kickup. I'd recommend putting the *forward* front roll center hinge pin at position 0.00, instead of +0.75. You might also try changing the outer ackerman position to #2 to keep the inside wheel from dragging too much in the middle of the corner. If you lose too much steering, just increase your front camber to 2.0d and maybe change the front camber link quick roll center position to #1. |
|
| Author: | pilot [ Thu Apr 03, 2008 21:17:44 ] |
| Post subject: | |
| Author: | pilot [ Fri Apr 04, 2008 03:29:42 ] |
| Post subject: | |
| Author: | teamgp [ Fri Apr 04, 2008 04:31:33 ] |
| Post subject: | |
| Author: | pilot [ Fri Apr 04, 2008 18:37:17 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|