XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T2 2008 Diffs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=7153 |
Page 1 of 1 |
Author: | 4wheeldrive [ Wed Feb 20, 2008 21:56:15 ] |
Post subject: | T2 2008 Diffs |
Author: | WEST [ Thu Feb 21, 2008 00:47:08 ] |
Post subject: | |
i have a feeling that the slots in the T2'008 diff drive shafts are 3.5mm while on the T2'007 are 3mm but maybe with some slight moddificaton they might fit? why not just buy the 007 diff, there wont be much gain if any, by changing to the 008 diff. |
Author: | Ben Cosgrove [ Thu Feb 21, 2008 01:04:49 ] |
Post subject: | |
The diffs from the 008 have a bigger pulley offset as the layshaft pulleys have more off set than the 007, they will fit but the belt wil not run true on the 007. |
Author: | 4wheeldrive [ Thu Feb 21, 2008 02:50:20 ] |
Post subject: | |
I was just trying to eliminate the blades, the new 08 doesn't use them that's whay I was wondering if the diff would fit an older car. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |