| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Wheelbase on T2 008 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=7123 |
Page 1 of 1 |
| Author: | Cam [ Sun Feb 17, 2008 00:24:28 ] |
| Post subject: | Wheelbase on T2 008 |
I have an EU spec T2 008 I am trying to adjust wheelbase to give me a bit more rear grip but I am struggling to understand what the actual wheelbase is. When I compare the build instructions against the set up book instructions they do not match. I currently have a 2mm spacer in front of the Rr arm and a 1 mm spacer at the back, What wheelbase does this equate to and what spacers should i add/remove to reduce wheelbase by 2mm? Thanks Cam |
|
| Author: | Tonyv [ Sun Feb 17, 2008 01:50:02 ] |
| Post subject: | |
You remove the 2mm spacer at the front of the rear arms and put it at the back of the rear arms instead. I.e. you need 0mm spacers in front of the rear arms and 3mm at the rear of the rear arms. The wheelbase is defined as the distance between the front and rear axles. |
|
| Author: | Cam [ Sun Feb 17, 2008 12:38:25 ] |
| Post subject: | |
Tony, That makes sense. I couldn't work it out last night but after a good nights sleep I am thinking clearer. Do you know what the actual wheelbase is in mm? Cam |
|
| Author: | Tonyv [ Sun Feb 17, 2008 18:36:44 ] |
| Post subject: | |
| Author: | Elliott Harper [ Sun Feb 17, 2008 23:42:07 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|