XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Bearings failed too soon https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=7001 |
Page 1 of 1 |
Author: | komkit [ Sun Jan 27, 2008 17:44:47 ] |
Post subject: | Bearings failed too soon |
Author: | nnick [ Wed Jan 30, 2008 11:44:45 ] |
Post subject: | |
Hi, this is known issue with the first T2007. Bearings in the kit came unlubricated which is why you had that failure. There is somewhere an announcement regarding this issue also. |
Author: | teamgp [ Wed Jan 30, 2008 16:50:04 ] |
Post subject: | |
Komkit, Unfortunately, nnick is right. . BTW, this is Guy Hood. I've raced with you before at Mimi's. You have a PM. ![]() |
Author: | komkit [ Wed Jan 30, 2008 19:56:43 ] |
Post subject: | |
Author: | Tonyv [ Thu Jan 31, 2008 12:00:46 ] |
Post subject: | |
Author: | rx7ttlm [ Thu Jan 31, 2008 22:57:00 ] |
Post subject: | |
Author: | Michael Clark [ Mon Feb 04, 2008 09:24:48 ] |
Post subject: | bearings |
I clean all my bearings every race day these days with our dusty tracks here in Australia. The new hudy bearing lube is really good to. ![]() |
Author: | adamg [ Tue Feb 05, 2008 01:14:29 ] |
Post subject: | |
I take the lazy approach. I don't do anything to a new bearing - just drop it in and run it. When it gets grindy, it goes in the garbage and a new one goes in. I buy new ones in sets from ebay for about $25 per set. |
Author: | YELLOWSHARK [ Tue Feb 05, 2008 13:04:15 ] |
Post subject: | |
Author: | YELLOWSHARK [ Tue Feb 05, 2008 20:33:17 ] |
Post subject: | |
Does anyone know where in the UK you can buy the Hudy bearing oil from? I have poured over the net and cannot find it on any of my normal Xray/Hudy stockists. |
Author: | brano [ Wed Feb 06, 2008 05:45:01 ] |
Post subject: | |
Author: | YELLOWSHARK [ Wed Feb 06, 2008 11:02:21 ] |
Post subject: | |
Author: | ceong [ Wed Feb 06, 2008 16:57:07 ] |
Post subject: | |
Author: | gmwizard [ Mon Feb 11, 2008 21:14:17 ] |
Post subject: | |
Author: | adamg [ Tue Feb 12, 2008 02:41:05 ] |
Post subject: | |
No doubt Acer thanks you, gm. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |