XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Downstops vs. droop https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=6984 |
Page 1 of 1 |
Author: | JoelV [ Fri Jan 25, 2008 05:58:12 ] |
Post subject: | Downstops vs. droop |
Author: | rx7ttlm [ Fri Jan 25, 2008 13:21:51 ] |
Post subject: | Re: Downstops vs. droop |
Author: | Martin Hudy [ Fri Jan 25, 2008 16:02:32 ] |
Post subject: | |
yes, you can measure and compare it with caliber but I recommend to buy the Hudy downstop downstop blocks because I measure my downstop also on foam car |
Author: | rx7ttlm [ Fri Jan 25, 2008 21:31:06 ] |
Post subject: | |
Author: | mutley001 [ Fri Jan 25, 2008 22:54:38 ] |
Post subject: | |
Sorry to post on this thread but it is related to the topic. If I set the downstops to 6mm front and 5 mm rear I don't get any droop at all with a 5 mm ride hight. I'm running on carpet with rubber tyres and following th ekit carpet setup at the moment which when on track causes te front to dig in when coming off the straight in to a sweeper (rear inside wheel lifts) Am i doing anything wrong or is this correct for carpet and I need to change something else? Thanks for any advice |
Author: | Tonyv [ Sat Jan 26, 2008 00:35:23 ] |
Post subject: | |
Author: | mutley001 [ Sat Jan 26, 2008 13:25:38 ] |
Post subject: | |
Author: | PDX-Spike [ Tue Jan 29, 2008 04:58:35 ] |
Post subject: | |
Author: | mutley001 [ Tue Jan 29, 2008 09:31:31 ] |
Post subject: | |
Author: | teamgp [ Tue Jan 29, 2008 14:42:22 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |