XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
FK bulkheads and eccentric carriers https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=690 |
Page 1 of 1 |
Author: | jlrogers [ Fri Dec 24, 2004 18:14:13 ] |
Post subject: | FK bulkheads and eccentric carriers |
I have an Evo 2 that I lovingly refer to as my Evo 2.5. I have updated everything to a factory kit except the bulkheads. I have pics posted at: I have since ordered the front roll bar and the roll center and Ackerman adjustment parts. I have 2 questions. Aside from the physical differences between the bulkheads has anyone noticed a difference in the way the car handles? I am trying to make up my mind if it is worth the $100 for the upgrade. My last question is kind of silly and I think I have been over thinking the whole thing. When tightening or loosening the belts do I move the eccentric carriers the same direction or in the opposite direction? (i.e. if I move one towards the front of the car do I move the other toward the rear?) thanks |
Author: | teamgp [ Fri Dec 24, 2004 22:59:00 ] |
Post subject: | |
Opposite directions To tighten front, rotate towards the rear To tighten rear, rotate towards the front and vice versa to loosen each... The manual can be viewed at: http://www.teamxray.com/teamxray/showfi ... le_id=1395 |
Author: | jlrogers [ Fri Dec 24, 2004 23:06:37 ] |
Post subject: | |
i don't mean front opposite from rear i mean left opposite from right teamgp what is your name i just moved from norfolk |
Author: | Squidward [ Fri Dec 24, 2004 23:17:25 ] |
Post subject: | |
The eccentrics should move the same way relative to the chassis. |
Author: | teamgp [ Fri Dec 24, 2004 23:30:38 ] |
Post subject: | |
Just a regular Guy... |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |