| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Free Drivetrain? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=686 |
Page 1 of 1 |
| Author: | coledog855 [ Fri Dec 24, 2004 01:10:34 ] |
| Post subject: | Free Drivetrain? |
| Author: | trickpatrick [ Fri Dec 24, 2004 01:58:43 ] |
| Post subject: | |
| Author: | PlainOleDave [ Fri Dec 24, 2004 02:14:34 ] |
| Post subject: | |
| Author: | coledog855 [ Fri Dec 24, 2004 02:29:40 ] |
| Post subject: | |
| Author: | PlainOleDave [ Fri Dec 24, 2004 02:52:17 ] |
| Post subject: | |
| Author: | coledog855 [ Fri Dec 24, 2004 03:52:47 ] |
| Post subject: | |
| Author: | trickpatrick [ Fri Dec 24, 2004 06:29:53 ] |
| Post subject: | |
| Author: | coledog855 [ Fri Dec 24, 2004 16:02:00 ] |
| Post subject: | |
I took off the rear belt and the front was still tight. Then I removed the front belt and the rear was tight. I've checked all the bearings and they still seem to resisting movement. None of the bearings free spin. I'm thinking that I have aftermarket bearings, not the Xray bearings, and they are packed with grease. I'll clean them out after Christmas and tell you if that fixes the problem. Thanks for the help. |
|
| Author: | littleal [ Fri Dec 24, 2004 22:01:11 ] |
| Post subject: | |
I think you may have the start of or maybe even full blown siezure of the layshaft bearings. Are the wheels free to rotate with both belts removed? |
|
| Author: | coledog855 [ Fri Dec 24, 2004 22:31:11 ] |
| Post subject: | |
I have backup bearings. Now that I think of it, the layshaft didn't spin as freely as the one-way shaft did on my spare bulkheads. thanks for the tip |
|
| Author: | scr8pn4205 [ Tue Dec 28, 2004 18:47:07 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|