XRAY - Model racing cars

Have basic set-up T2007 us foam, front sway-bar 35 front 37rear shore foams, 10g weights each corner battery side to balance car.

I find that when I go into corners at speed motor/electrics backside(right hand corners only)swings round to much, In the straights slow corner she handles good I pursume i have to much front traction or front weight any suggestions to improve cornering at speed.

Do you have fast left corners too? IE are you saying it works OK going left but not right on fast corners. If so then I would check to see if the car is tweaked. Might also be worth checking your wheel/tyres; are the tyres all glued continuously on the rim and round.

If you have no fast left handers then you could start by softening the rear suspension and or increasing front droop. Bit difficult without a bit more info or clarification. Maybe you are running too much inner wheel turn in angle?