XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
high speed "pull" https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=6573 |
Page 1 of 2 |
Author: | Edwin Pibal [ Mon Nov 12, 2007 05:15:25 ] |
Post subject: | high speed "pull" |
Hi Everyone ive retired my tfk04 and am now useing a t2 I am having a probelm where if at speed, the car will pull to the left. it does not do this at low speed. I have the milti diff set in the spool setting this is the first time on the track, as its new out of the box can any one sugest any thing? thank you Edwin |
Author: | Martin Hudy [ Mon Nov 12, 2007 13:24:59 ] |
Post subject: | |
please check if the tweak of the car is good because this may cause that car does not go straight. The problem can be also in the bearings, please check if all the bearings are working properly. |
Author: | Edwin Pibal [ Tue Nov 13, 2007 11:17:32 ] |
Post subject: | |
Author: | Edwin Pibal [ Tue Nov 27, 2007 23:39:29 ] |
Post subject: | |
Author: | Tonyv [ Wed Nov 28, 2007 16:33:30 ] |
Post subject: | |
Author: | Edwin Pibal [ Wed Nov 28, 2007 21:22:40 ] |
Post subject: | |
Author: | Edwin Pibal [ Fri Jan 04, 2008 08:39:07 ] |
Post subject: | |
Hello everyone I am having a most fustrating time with my t2, i have still NOT managed to fix the car pulling to the left. i have done the following replaced all the bearings in the car replaced the multi diff with a normal diff rebuilt all the shocks and set them with a micrometer removed and checked the sway bars checked, checked and re checked the chassis for tweak checked the toe (-1 degree), caster (4 degree hubs), camber (-2 degrees) replaced the servo horn. I am lost as to what the cars problem could be. is there something i am missing or not checking please help me. thank you Edwin |
Author: | Hurrle [ Fri Jan 04, 2008 12:19:02 ] |
Post subject: | |
Have you checked the weight balance? |
Author: | Edwin Pibal [ Fri Jan 04, 2008 13:17:24 ] |
Post subject: | |
Author: | Tonyv [ Fri Jan 04, 2008 13:22:12 ] |
Post subject: | |
Author: | Edwin Pibal [ Sat Jan 05, 2008 06:08:04 ] |
Post subject: | |
Author: | teamgp [ Sat Jan 05, 2008 06:16:30 ] |
Post subject: | |
Author: | YELLOWSHARK [ Sat Jan 05, 2008 14:43:22 ] |
Post subject: | |
Author: | adamg [ Sat Jan 05, 2008 18:14:28 ] |
Post subject: | |
I would also try loosening all the topdeck and bottomdeck screws. It is possible to get a left bulkhead bolted to the bottom chassis at a different angle than that right bulkhead. |
Author: | Tonyv [ Sat Jan 05, 2008 22:05:24 ] |
Post subject: | |
Author: | Edwin Pibal [ Sun Jan 06, 2008 00:17:12 ] |
Post subject: | |
Author: | Edwin Pibal [ Sun Jan 06, 2008 00:20:01 ] |
Post subject: | |
Author: | Edwin Pibal [ Sun Jan 06, 2008 00:20:54 ] |
Post subject: | |
Author: | Edwin Pibal [ Sun Jan 06, 2008 00:24:18 ] |
Post subject: | |
Author: | Tonyv [ Mon Jan 07, 2008 14:29:33 ] |
Post subject: | |
Page 1 of 2 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |