XRAY - Model racing cars

Hi Everyone

ive retired my tfk04 and am now useing a t2

I am having a probelm where if at speed, the car will pull to the left.

it does not do this at low speed.

I have the milti diff set in the spool setting

this is the first time on the track, as its new out of the box

can any one sugest any thing?

thank you

Edwin

please check if the tweak of the car is good because this may cause that car does not go straight. The problem can be also in the bearings, please check if all the bearings are working properly.

Hello everyone

I am having a most fustrating time with my t2, i have still NOT managed to fix the car pulling to the left.

i have done the following

replaced all the bearings in the car
replaced the multi diff with a normal diff
rebuilt all the shocks and set them with a micrometer
removed and checked the sway bars
checked, checked and re checked the chassis for tweak
checked the toe (-1 degree), caster (4 degree hubs), camber (-2 degrees)
replaced the servo horn.

I am lost as to what the cars problem could be.

is there something i am missing or not checking

please help me.

thank you
Edwin

Have you checked the weight balance?

I would also try loosening all the topdeck and bottomdeck screws. It is possible to get a left bulkhead bolted to the bottom chassis at a different angle than that right bulkhead.