XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
007 servo-saver https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=6569 |
Page 1 of 1 |
Author: | Hurricane '007 [ Sun Nov 11, 2007 15:54:35 ] |
Post subject: | 007 servo-saver |
Hi, yesterday while setting up my car, I recognized that my servo saver is able to move up- and downwards quite much. The bushing in the topdeck moves up and down when I steer. Is this normal ? Looks really strange to me... ![]() Shouldn't the bushing in the topdeck stay at is's position without moving and only the servo saver itself can move a bit ?! Thanks in advance. Regards, Patrick |
Author: | Martin Hudy [ Mon Nov 12, 2007 13:29:57 ] |
Post subject: | |
Hi, this may happened when the bushing is old and used for a long time. Normally, it does not influence the car performance. It happened to me as well but the car worked without any problems. If you feel uncomfortable with that, try new bushing, or glue it on top deck. use glue only on a small part of the bushing, so you can later remove it from the top deck |
Author: | Hurricane '007 [ Wed Nov 14, 2007 18:39:57 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |