XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Thick Chassis advantage indoors with rubber tyres? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=65 |
Page 1 of 1 |
Author: | MR JOLLY [ Sat Sep 11, 2004 17:18:07 ] |
Post subject: | |
Author: | Tonyv [ Sun Sep 12, 2004 13:28:30 ] |
Post subject: | |
Author: | Neil Rabara [ Sun Sep 12, 2004 16:35:55 ] |
Post subject: | |
Author: | Robfo [ Sun Sep 12, 2004 17:57:31 ] |
Post subject: | |
Author: | Tonyv [ Sun Sep 12, 2004 20:34:11 ] |
Post subject: | |
Author: | MR JOLLY [ Sun Sep 12, 2004 22:51:29 ] |
Post subject: | |
Author: | Tonyv [ Mon Sep 13, 2004 13:02:32 ] |
Post subject: | |
Author: | Robfo [ Mon Sep 13, 2004 17:02:24 ] |
Post subject: | |
Author: | MR JOLLY [ Mon Sep 13, 2004 22:05:52 ] |
Post subject: | |
Author: | Tonyv [ Tue Sep 14, 2004 11:12:22 ] |
Post subject: | |
I usually run 30W as well. Only if grip becomes high on the bigger events is it sometimes a good idea to consider 35 or 40 weight. In this case lazyness is a blessing ![]() |
Author: | MR JOLLY [ Tue Sep 14, 2004 23:52:18 ] |
Post subject: | |
Author: | nick51 [ Wed Sep 15, 2004 03:59:24 ] |
Post subject: | |
Author: | dontfeelcold [ Wed Sep 15, 2004 04:55:57 ] |
Post subject: | |
Author: | MR JOLLY [ Wed Sep 15, 2004 09:04:36 ] |
Post subject: | |
Author: | Tonyv [ Wed Sep 15, 2004 10:03:29 ] |
Post subject: | |
Author: | MR JOLLY [ Wed Sep 15, 2004 23:59:56 ] |
Post subject: | |
Author: | dontfeelcold [ Thu Sep 16, 2004 09:37:22 ] |
Post subject: | |
Author: | MR JOLLY [ Thu Sep 16, 2004 19:03:25 ] |
Post subject: | |
I have just read all my post`s & it seems that i`m moaning about this,moaning about that,did`nt do this,did`nt do that ![]() tony The roll centre issues is with the three holes in the alloy bulk head on the rear |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |