| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Electric Motor Cleaner - Help https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=6143 |
Page 1 of 1 |
| Author: | grbrum [ Tue Sep 04, 2007 18:29:11 ] |
| Post subject: | Electric Motor Cleaner - Help |
| Author: | FOXY923 [ Tue Sep 04, 2007 18:36:38 ] |
| Post subject: | |
| Author: | grbrum [ Tue Sep 04, 2007 18:42:08 ] |
| Post subject: | |
| Author: | Joonas O [ Tue Sep 04, 2007 19:29:49 ] |
| Post subject: | |
| Author: | grbrum [ Tue Sep 04, 2007 19:39:48 ] |
| Post subject: | |
| Author: | Tonyv [ Tue Sep 04, 2007 21:37:11 ] |
| Post subject: | |
| Author: | Hurricane '007 [ Tue Sep 04, 2007 22:13:41 ] |
| Post subject: | |
| Author: | oldcarguy [ Wed Sep 05, 2007 01:00:03 ] |
| Post subject: | |
| Author: | grbrum [ Wed Sep 05, 2007 02:30:45 ] |
| Post subject: | |
| Author: | Hurricane '007 [ Wed Sep 05, 2007 10:11:12 ] |
| Post subject: | |
Oh god damn.... just buy Robitronic Motorspray and everything is fine. ( http://www.robitronic.eu/go/robitronic/ ... fTnHcANgA$)/s,showModuleObject,9_q1klWYtB,cxW0_xS0jRW2gVq14Bb1jRW28Rr14Bb1jZWZnNX-jtWYgxm1dtqZgVG,4Fa0jtW3hxW2nB,8xa0nVX0_JH,nRXYoxF1m_a2uAb1jRW28Rr1ukENkID,nB,9VG,hxGZplWZnxC1mxGZpNG2nxmY6RXZbxa1dVq1jwqLlAD.html ) #edit: if you want to see the product, copy the whole link ! Didn't work like that... |
|
| Author: | grbrum [ Wed Sep 05, 2007 12:56:10 ] |
| Post subject: | |
Thank you for the info, but as I said in this thread, It is not easy to find RC specific motor cleaners. I looked at most LHS around and they do not carry RC specific motor cleaners. I will try the Loctite or try to contact local chemical industries. Thanks. |
|
| Author: | FOXY923 [ Wed Sep 05, 2007 14:22:02 ] |
| Post subject: | |
Just go to any real car (1:1) garage, shop, part store, wal-mart?, and get some brake cleaner. Not really sure what you have in Brazil but I'm sure you could find some brake cleaner someplace. |
|
| Author: | Hurricane '007 [ Wed Sep 05, 2007 16:39:27 ] |
| Post subject: | |
but to come back to my question: "...apropos cleaning: Question (I didn't want to open a new thread): Do I really have to clean and re-oil all T2 '007 bearings (how it is told on the small sheet of paper "additional information for the ball-bearings) when i built the car the first time ?? There they say "Apply standard bearing oil in all ball-bearings BEFORE installing the ball-bearings in the car." " Greetz, Pat. |
|
| Author: | grbrum [ Wed Sep 05, 2007 16:43:32 ] |
| Post subject: | |
Hi, if you remove the bearings after some runs (depending on the track suface and cleaniness*), you may feel that the bearings are a little strange (with dirt inside them) that does not allow them to freely move. So, It is nice to open the bearings after some runs (I do it once a month) flush the dirt out (today I do it with solvent, but I wish to use the motor spray) dry and oil them again. This works fine for me and keep the bearings mooving free and clean. Remember that clean is fast (always). and this works for all parts in your car. Hope it helps. |
|
| Author: | grbrum [ Wed Sep 05, 2007 16:46:10 ] |
| Post subject: | |
Hi, I mean if it is not the first time you use the bearings. If it is, in my case I flush them with WD40 and put some bearing oil as well. They are fine. good luck |
|
| Author: | Hurricane '007 [ Wed Sep 05, 2007 16:57:53 ] |
| Post subject: | |
Thanks. I knew how to clean them but I just wasn't sure if you should clean the bearings before installing them in the car the first time... best wishes |
|
| Author: | Hurricane '007 [ Thu Sep 06, 2007 19:43:43 ] |
| Post subject: | |
| Author: | grbrum [ Thu Sep 06, 2007 20:06:27 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|