XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
info needed https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=6069 |
Page 1 of 1 |
Author: | srs64 [ Thu Aug 23, 2007 02:11:30 ] |
Post subject: | info needed |
I am needed a little help to get me going in the right direction. I am the only X-ray that runs in our on road club, I got it used from a guy that ran it in the mod class with great success. I am running in the 19t class. The car is a T2 I have went over the car and upgraded the bearings to ceramics. The problem I am having seems to be getting a descent top end speed. I have been to 2 races and seem to get left behind on the top end. I have worked on the gearing and if I go up on pinion it over heats? Here is what I have we run outdoors, asphalt, tracks about 130ft x 80 ft with 1 long straight the rest sorta choppy T2 Foam tires for main the Dia was 2.534 84 Spur 23 pinion I am using Checkpoint 19t money motor ESC is a GT7 4200 EP promatch 6 cell I noticed it the setup sheet that came with the car says to use a 87spur/18 pinion Am I missing the boat here? Any advice is welcome Thanks Sherman |
Author: | teamgp [ Thu Aug 23, 2007 14:44:10 ] |
Post subject: | |
Author: | srs64 [ Thu Aug 23, 2007 15:20:30 ] |
Post subject: | |
Author: | teamgp [ Thu Aug 23, 2007 15:35:54 ] |
Post subject: | |
Author: | Xfactor [ Thu Aug 23, 2007 17:15:48 ] |
Post subject: | Re: info needed |
Author: | srs64 [ Fri Aug 24, 2007 02:47:49 ] |
Post subject: | |
Author: | srs64 [ Fri Aug 24, 2007 02:51:53 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |