XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Steering Knucles ? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=5956 |
Page 1 of 1 |
Author: | got2bqik [ Mon Aug 06, 2007 02:48:23 ] |
Post subject: | Steering Knucles ? |
I have a T2 007 US version, running a Mamba esc and feigao motor. So it is real fast. My problem is racing at the local parking lot races if I hit the boards the front knuckle breaks the lower srew mount and throws the axel end out.Cost me 1st today! Are the aluminium knuckles going to solve this or move the break point to something else?A foam tire car running rubber tires on asphalt it is awsome only limited by my driving, but minor encounters with the wall snaps the knucle ending my race. Other than not hitting the wall and the aluminiom knuckles what else can I do? Tim |
Author: | pilot [ Mon Aug 06, 2007 09:30:08 ] |
Post subject: | Knuckles |
Author: | got2bqik [ Sun Sep 02, 2007 23:16:26 ] |
Post subject: | |
![]() Tim |
Author: | pilot [ Mon Sep 03, 2007 10:24:49 ] |
Post subject: | Screws |
Author: | teamgp [ Mon Sep 03, 2007 15:26:34 ] |
Post subject: | |
Author: | got2bqik [ Mon Sep 03, 2007 16:42:28 ] |
Post subject: | |
Author: | teamgp [ Mon Sep 03, 2007 18:49:41 ] |
Post subject: | |
Author: | got2bqik [ Mon Sep 03, 2007 20:01:14 ] |
Post subject: | |
Author: | teamgp [ Mon Sep 03, 2007 20:22:35 ] |
Post subject: | |
Author: | got2bqik [ Wed Sep 05, 2007 00:28:18 ] |
Post subject: | |
Author: | teamgp [ Wed Sep 05, 2007 15:18:09 ] |
Post subject: | |
Author: | got2bqik [ Thu Sep 06, 2007 00:21:02 ] |
Post subject: | |
Author: | teamgp [ Thu Sep 06, 2007 14:30:32 ] |
Post subject: | |
Author: | got2bqik [ Sat Sep 08, 2007 01:23:11 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |