Steering Knucles ?

got2bqik · **Posted:** Mon Aug 06, 2007 02:48:23

I have a T2 007 US version, running a Mamba esc and feigao motor. So it is real fast. My problem is racing at the local parking lot races if I hit the boards the front knuckle breaks the lower srew mount and throws the axel end out.Cost me 1st today! Are the aluminium knuckles going to solve this or move the break point to something else?A foam tire car running rubber tires on asphalt it is awsome only limited by my driving, but minor encounters with the wall snaps the knucle ending my race. Other than not hitting the wall and the aluminiom knuckles what else can I do?
Tim

pilot · **Posted:** Mon Aug 06, 2007 09:30:08

got2bqik · **Posted:** Sun Sep 02, 2007 23:16:26

Okay got the aluminium steering arms. Now every heat I lost the bottom screw after 2 nd time I was out of bushings. Improvised a servo sleeve that goes thru the rubber groment. Let me back up after loosing the 1st one locktighted the next one still came out now where on to the improv fix CA'd that sucker in still came out didn't last 3 laps. The car is fast enogh for 2nd easy. 1st I'd have to drive much better. I'm getting really frustrated with this problem.I can't win if I can't finsh! We are not talking about 48mph head on hits either glancing hits off the wall. Hitting on the left front and problem with the right front. What am I missing??
Tim

pilot · **Posted:** Mon Sep 03, 2007 10:24:49

teamgp · **Posted:** Mon Sep 03, 2007 15:26:34

got2bqik · **Posted:** Mon Sep 03, 2007 16:42:28

teamgp · **Posted:** Mon Sep 03, 2007 18:49:41

got2bqik · **Posted:** Mon Sep 03, 2007 20:01:14

teamgp · **Posted:** Mon Sep 03, 2007 20:22:35

got2bqik · **Posted:** Wed Sep 05, 2007 00:28:18

teamgp · **Posted:** Wed Sep 05, 2007 15:18:09

got2bqik · **Posted:** Thu Sep 06, 2007 00:21:02

teamgp · **Posted:** Thu Sep 06, 2007 14:30:32

got2bqik · **Posted:** Sat Sep 08, 2007 01:23:11

XRAY - Model racing cars

Steering Knucles ?

Who is online