| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| 1/10th scale touring bodies, wich is your favorite. https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=585 |
Page 1 of 2 |
| Author: | apexracing [ Tue Dec 07, 2004 21:00:44 ] |
| Post subject: | 1/10th scale touring bodies, wich is your favorite. |
| Author: | Keith Warnick [ Wed Dec 08, 2004 04:48:21 ] |
| Post subject: | |
| Author: | trickpatrick [ Wed Dec 08, 2004 08:42:52 ] |
| Post subject: | |
| Author: | teamgp [ Wed Dec 08, 2004 08:43:20 ] |
| Post subject: | |
| Author: | Sam_Smith [ Wed Dec 08, 2004 11:06:35 ] |
| Post subject: | |
| Author: | murfy [ Wed Dec 08, 2004 11:46:05 ] |
| Post subject: | |
| Author: | Ginger_Mat [ Wed Dec 08, 2004 12:14:40 ] |
| Post subject: | |
| Author: | Sam_Smith [ Wed Dec 08, 2004 13:28:15 ] |
| Post subject: | |
| Author: | mcsquish [ Wed Dec 08, 2004 15:08:34 ] |
| Post subject: | |
| Author: | Daniel [ Wed Dec 08, 2004 15:29:24 ] |
| Post subject: | shell |
dodge stratus 2 |
|
| Author: | ianp [ Wed Dec 08, 2004 15:53:00 ] |
| Post subject: | |
| Author: | Robfo [ Wed Dec 08, 2004 15:57:25 ] |
| Post subject: | |
| Author: | Ginger_Mat [ Wed Dec 08, 2004 16:08:48 ] |
| Post subject: | |
| Author: | Sam_Smith [ Wed Dec 08, 2004 16:33:10 ] |
| Post subject: | |
| Author: | apexracing [ Wed Dec 08, 2004 18:25:17 ] |
| Post subject: | |
| Author: | Robfo [ Wed Dec 08, 2004 18:36:20 ] |
| Post subject: | |
| Author: | jbRAYcer [ Wed Dec 08, 2004 18:41:41 ] |
| Post subject: | |
| Author: | Sam_Smith [ Wed Dec 08, 2004 18:57:51 ] |
| Post subject: | |
| Author: | teamgp [ Wed Dec 08, 2004 19:45:37 ] |
| Post subject: | |
It sounds like your talking about the protoform alfa. If so, the Parma alfa is quite different. I tried both brands and the Parma alfa's fit on the chassis with short front tower and performance using the standard cut lines for shaping were spot on for me. I drive a combination of smooth lines out of traffic and aggressive lines with traffic. |
|
| Author: | apexracing [ Wed Dec 08, 2004 20:16:36 ] |
| Post subject: | |
opps, my bad guys i was referenceing to the cts body sam sorry. and for the alpha i never tryed the parma yes the protoform one sucks, and the losi one as well, i'll give the parma one a try. i was also thinking about the mazzda 8, oh and i have also ran the honda s2000. here are my bodies i have run in the past and there characteristics. nissan silvia, netural into and out of corners, biast in the front mid through. mazzda 6. body very stable through out, body pushes slightly due to high rear downforce, may i also say this body is very durable!! mustang, also very stable but, lack of rear down force cause's a need for more rear traction compound. s 2000. never realy ran it much when i did it tended to make my car over steer had no clue why, any i deas. stratus, hpi,1. body not very durable but ran netural, body flex rubbes on tires if tires are overe 2.2 mm foam only. mini cooper. i know guys it's not a realy good body, but i ran it in a mini cooper spec race, it was a special event. body ran ok but roof line was way to high. hks altezza. this body ran very well lots of rear grip, bosy was very ridgid but heavy. protoform alpha. sucked roof line too high body too narrow. second gereration eclpise. loved the body ecept for it's durability, first gereration eclipse, body too narrow also very fragile, made cxar very twitchy. over all so far i like the mazzda 6, and nissan silvia the best, keep in mind guys i race 6 cell carpet oval at my local track, and 6 cell touring only for special events at a track near by. my local track's website is www.m&whobbyandcraft.com and the other track it www.fountainraceway.com look em up. |
|
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|