Ah never thought of that, I will try some different ones as I am running the kit spur gears.
Cheers
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Ghostly Evo 2 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=578 |
Page 1 of 1 |
| Author: | Evo2 Mart [ Mon Dec 06, 2004 22:40:26 ] |
| Post subject: | Ghostly Evo 2 |
| Author: | Golden Boy [ Mon Dec 06, 2004 23:25:06 ] |
| Post subject: | |
Are you running the Xray spur gears? The large hole in the Xray spur gear can make a wooooing noise on the strait. If you want to get ride of it try using a Kimbrough gear. |
|
| Author: | Evo2 Mart [ Tue Dec 07, 2004 01:01:47 ] |
| Post subject: | |
Ah never thought of that, I will try some different ones as I am running the kit spur gears. Cheers
|
|
| Author: | loony toon [ Tue Dec 07, 2004 01:34:48 ] |
| Post subject: | |
the evo2 comes with a kimbrough spur anyway...the later t1rs and FKs came with the new spur gears. |
|
| Author: | JAUNE [ Tue Dec 07, 2004 06:36:49 ] |
| Post subject: | |
Are you running a monster or epic roar stock? I know when my car make that sound, I take the motor apart and the arm has some wear on one side of the shaft and make it loose in the bushing. Remove the belt from the pulley and give it full throttle you may still hear it. |
|
| Author: | Evo2 Mart [ Wed Dec 08, 2004 01:06:28 ] |
| Post subject: | |
| Author: | loony toon [ Wed Dec 08, 2004 01:13:15 ] |
| Post subject: | |
| Author: | chipmunk [ Wed Dec 08, 2004 20:03:21 ] |
| Post subject: | |
i dont suppose that anyone has noticed an increase in noise when running the new thick chassis , i think it could be because there are less holes for the niose to escape from |
|
| Author: | teamgp [ Wed Dec 08, 2004 23:18:22 ] |
| Post subject: | |
I haven't noticed any noise from the thick chassis |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|