| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| bearings maintainence https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=5528 |
Page 1 of 1 |
| Author: | T2Rlover [ Tue May 22, 2007 06:13:05 ] |
| Post subject: | bearings maintainence |
| Author: | the_penfool [ Tue May 22, 2007 13:47:02 ] |
| Post subject: | |
you need to take of the blue plastic covers first use a sharp hobby knife or something witha small point then wash the bearing with a bearing blaster spray or something similar to get any tiny bits of dirt out. Repeat this part if the bearing are particularly dirsty or have not been cleaned for a while then reoil with a couple of drop of light oil then replace the covers making sure they are flat and do not cause any interference with the bearing. |
|
| Author: | teamgp [ Tue May 22, 2007 18:16:48 ] |
| Post subject: | |
For more tips take a look at the '' post in the XRAY T1FK'05 FAQ thread. |
|
| Author: | T2Rlover [ Thu May 24, 2007 03:31:41 ] |
| Post subject: | |
is there a fixed direction of the bearing that should be facing out? |
|
| Author: | mario [ Thu May 24, 2007 09:49:50 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|