I am racing with them for a while (about 6 months) and they are very strong and good looks.
They are thicker than original and therefore sometimes very useful at the rear.
cheers
Pedro
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| New shock towers https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=533 |
Page 1 of 1 |
| Author: | trickpatrick [ Mon Nov 29, 2004 08:36:29 ] |
| Post subject: | New shock towers |
I hear there are new shock towers coming with more upright positions is this true and what would the benifits be?? Thanks |
|
| Author: | mario [ Mon Nov 29, 2004 10:48:52 ] |
| Post subject: | |
There are no new shock towers. This is latest front shock tower #302096: http://www.teamxray.com/teamxray/produc ... kategoria= This is latest rear shock tower #303093: http://www.teamxray.com/teamxray/produc ... kategoria= |
|
| Author: | trickpatrick [ Mon Nov 29, 2004 21:57:35 ] |
| Post subject: | Rear shock mounted in body post hole |
I read this somewhere And have seen this in setup sheets on myst.com Something about factory drivers trying this. http://www.atheenaprojects.com/ They have new towers but out of stock. ???? |
|
| Author: | Big Jimmy G [ Mon Nov 29, 2004 22:12:35 ] |
| Post subject: | |
My kit ones (FT kit) have three holes for the front shocks as well as different camber link positions and centre hole detail. The link Mario has supplied show a very different layout. From what I have heard other drivers say, if you have the front shock more upright it will help to stop the front end diving into the corners and the rear hooking round. It is a popular mod on the Associated TC3 to have a rear tower on the front for just this reason. James |
|
| Author: | Tonyv [ Mon Nov 29, 2004 23:29:35 ] |
| Post subject: | Re: Rear shock mounted in body post hole |
| Author: | John Reid [ Tue Nov 30, 2004 06:12:38 ] |
| Post subject: | |
I Email Atheena several months ago asking who the "top xray drivers" were who helped them develope the towers. They could not tell me any names to back up the advertising claims. I asked Mario about it and he confirmed that he was not aware of any "works" driver assiting them in the development of these towers. The Atheena towers are effectivly copies of the Xray towers, the alternative hole positions etc, closely match the latest Xray towers but I would doubt if they had as an exacting quality control such as Xray have. |
|
| Author: | Pedro Pinto [ Wed Dec 01, 2004 00:32:37 ] |
| Post subject: | Atheena Towers |
|
I am racing with them for a while (about 6 months) and they are very strong and good looks. They are thicker than original and therefore sometimes very useful at the rear. cheers Pedro |
|
| Author: | trickpatrick [ Wed Dec 01, 2004 09:15:59 ] |
| Post subject: | |
| Author: | trickpatrick [ Wed Dec 01, 2004 09:28:47 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|