Yes the Diff`s come pre built,
But what sponse is talking about is the front one way lube! u use it lube ur front one way ur center one way and all other one ways! I find the xray one way lube to be the best!
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T2 007 EU building question https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=5314 |
Page 1 of 1 |
| Author: | Sponse [ Sat Apr 21, 2007 02:40:25 ] |
| Post subject: | T2 007 EU building question |
| Author: | Mark007 [ Sat Apr 21, 2007 14:41:16 ] |
| Post subject: | |
| Author: | heink [ Sat Apr 21, 2007 21:30:45 ] |
| Post subject: | |
Yes the Diff`s come pre built, But what sponse is talking about is the front one way lube! u use it lube ur front one way ur center one way and all other one ways! I find the xray one way lube to be the best!
|
|
| Author: | Sponse [ Sun Apr 22, 2007 03:55:29 ] |
| Post subject: | |
No the One way diff is not prebuilt. There are 3 different ways to put the Multi-Diff together, so with Xray not knowing what one you want to use, it is not assembled. This is very disappointing that shock oil and diff lube (which I don't need) is included in the kits but no One Way Oil, which leaves me stuck with a new car in parts and stuck on the second step until I find ONE WAY OIL online and get it shipped to me. Again, really cheap. All I need is two drips of stinkin' One way Oil for my $400 car! What a turn off! Gotta say, this is very disappointing! |
|
| Author: | adamg [ Sun Apr 22, 2007 04:07:35 ] |
| Post subject: | |
That does seem a bit weird. They include enough shock oil to top up the shocks like 50 times, and enough diff lube to build like 30 diffs. |
|
| Author: | akaver [ Sun Apr 22, 2007 06:55:19 ] |
| Post subject: | |
| Author: | Sponse [ Sun Apr 22, 2007 13:02:52 ] |
| Post subject: | oil |
| Author: | Sponse [ Sun Apr 22, 2007 13:18:32 ] |
| Post subject: | |
| Author: | akaver [ Sun Apr 22, 2007 14:33:36 ] |
| Post subject: | |
| Author: | brano [ Mon Apr 23, 2007 08:27:15 ] |
| Post subject: | |
| Author: | nnick [ Mon Apr 23, 2007 10:59:02 ] |
| Post subject: | |
| Author: | Tonyv [ Mon Apr 23, 2007 17:38:53 ] |
| Post subject: | |
Nope. The one-way bearings only need to be lubed when you run the one-way or solid one-way setups. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|