XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Chassis Setup https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=528 |
Page 1 of 1 |
Author: | ben [ Sun Nov 28, 2004 14:51:42 ] |
Post subject: | Chassis Setup |
Author: | Big Jimmy G [ Mon Nov 29, 2004 22:21:40 ] |
Post subject: | |
I've been running my FT chassis almost as kit, excepf for the following changes:- 2 holes open in the front pistion, three in the rear. Dark blue springs on the front. Front ball diff. What inserts are you running? My car goes well with Yok medium (part #038M) inserts and inch up rims to stretch the rubber out a bit. If you find this hooks into the corners too much, have the front shocks more upright and incline the rear ones. Also try to angle the front camber link more, or even wind half a turn extra on all four droop screws. Hope this helps, James |
Author: | Nick [ Wed Dec 01, 2004 03:50:24 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |